Products

VSCP CAN based products

Place An Alternate Description Here! d
VSCP CAN modules are designed to work on a VSCP4CAN bus which use ordinary RJ-45 connectors and is powered with 9-28V DC over the same cable. This means there is no need for a separate power cabel. All that is needed is a CAT5 or better twisted pair cable. Buss length can be a maximum of 500 meters with drops of maximum 24 meters length (up to a total of 120 meters). As for all VSCP4CAN modules the communication speed is fixed at 125 kbps.

All VSCP modules contains information of there own setup, manual, hardware version, manufacturer etc. You just ask the module for the information you need and you will get it. When they are started up they have a default functionality that often is all that is needed to get a working setup. If the module have something to report it will send you an event and if it is setup to react on a certain type of event it will do it's work when you send event(s) to it.



Below are the current available modules:

Paris - Relay Module

Bejing - General I/O module

Accra - General counter module

Kelvin NTC10KA - Temperature module (one internal, 5 external)

Vilnius - General Analog to Digital module ( 0-10V)

San Fransico - Barometic pressure module


Place An Alternate Description Here! Place An Alternate Description Here!










































VSCP raw Ethernet & TCP/IP based products

Place An Alternate Description Here! Our Ethernet product line communicate using the raw Ethernet protocol. This means that they don't need any configuration after it is connected to your network. You can just use it. Power is supplied over the RJ45 connector so it's possible to power the module from a remote location using 12-50V DC. This means there is no need for a separate power cabel.

As all VSCP modules they contain information of there own setup, manual, hardware version, manufacturer etc. You just ask the module for the information you need and you will get it. When they are started up they have a default functionality that often is all that is needed to get a working setup. If the module have something to report it will send you an event and if it is setup to react on a certain type of event it will do it's work when you send event(s) to it.

Below are the current available modules:

Byssels - Ethernet temperature module

Napoli - Ethernet to VSCP over CAN

Roma - 433 MHz wireless receiver/transmitter

Leicester - Ethernet to VSCP over wireless 802.15.4



VSCP wireless products

Place An Alternate Description Here! This is 802.15.4 VSCP wireless modules. Modules in this series got high security and work right after installation. This is normally battery powered devices.

Tallin - Temperature module




VSCP wifi products

Place An Alternate Description Here! This is a series of wifi enabled modules.

Blitz - VSCP Remote Area Controller





Other products

Place An Alternate Description Here! We also make some products that support our product range.

PIC Programming adapter
Power injector for CAN4VSCP
Power injector for Ethernet4VSCP